Arduino Shields
Showing all 23 results
-
Arduino Boards, Arduino Shields, Development Boards
Arduino Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
Quick View
Arduino Boards, Arduino Shields, Development BoardsArduino Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
QUICK OVERVIEW
- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by for Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Can be accessed using the Mini SD TF library.
- IEEE802.3af compliant
- Low output ripple and noise (100mVpp)
- Overload and short-circuit protection
SKU: arduino ethernet shield -
Arduino Boards, Arduino Nano, Arduino Shields
Arduino Leonardo R3 Board Micro-USB compatible with Arduino
Quick ViewArduino Boards, Arduino Nano, Arduino ShieldsArduino Leonardo R3 Board Micro-USB compatible with Arduino
QUICK OVERVIEW
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Input Voltage (Recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
SKU: arduino leonardo₹400.00 -
Arduino Boards, Arduino Nano, Arduino Shields, Development Boards, IoT Boards
Arduino Mega 2560 R3 Board
Quick ViewArduino Boards, Arduino Nano, Arduino Shields, Development Boards, IoT BoardsArduino Mega 2560 R3 Board
QUICK OVERVIEW
- 54 digital input / output terminals (14 of which have programmable PWM outputs).
- 16 analog inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
- Operating voltage: 6 ~ 12v.
- Dimensions: 110 x 53 x 15 mm.
SKU: n/a₹675.00 -
Arduino Boards, Arduino Nano, Arduino Shields
Arduino Pro Mini 3.3V Atmega 328p 8Mhz
- ATmega328 running at 8MHz with external resonator (0.5% tolerance)
- Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
- DC input 3.3V up to 12V
- Analog Pins: 8, Digital I/Os: 14
- 3.3V regulator (Max 150mA output)
SKU: n/a -
Arduino Boards, Arduino Nano, Arduino Shields
Arduino Pro Mini Atmega328 5V 16Mhz
- Microcontroller ATmega328
- Board Power Supply: 6 – 12 V
- Circuit Operating Voltage: 3.3V; Check the backside of board for voltage marking.
- To find the model, supply RAW pin with 6V-12V and measure using multipmeter the VCC voltage (5V = 5V Arduino, 3.3V = 3.3V Arduino)
- One GND pins to the GND of the power source and one GND pins to the GND of the multimeter (you can take any of the Arduino pins labeled with GND)
SKU: n/a -
Arduino Boards, Arduino Shields, Development Boards
ARDUINO RELAY SHIELD V3.0 SEEED STUDIO
Arduino/Seeeduino Shield compatible High quality relays of 15A max switching current Built-in LED indicator for each relay Relay lifetime up to 100,000 Cycle Relay screws for firm connection
SKU: woo-long-sleeve-tee -
Arduino Boards, Arduino Nano, Arduino Shields, Development Boards
Arduino Uno Rev3
QUICK OVERVIEW
- Micro-controller : ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended) : 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- Comes in a shock static bag
*Product delivered is same as image. Does not vary
SKU: arduino uno r3₹359.00 -
Arduino Boards, Arduino Nano, Arduino Shields
Atmega32u4 Esplora Joystick Game Program Module for Arduino
Quick ViewArduino Boards, Arduino Nano, Arduino ShieldsAtmega32u4 Esplora Joystick Game Program Module for Arduino
- Atmega32u4 Esplora Joystick Game Program Module For Arduino IDE Oscillator Microcontroller Temperature Light Sensor Board Cable
- High Quality Integrated Circuits
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Flash Memory: 32 KB of which 4 KB used by bootloader
- SRAM: 2.5 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
SKU: n/a -
Arduino Boards, Arduino Nano, Arduino Shields
Cable For Arduino UNO/MEGA (USB A to B)
QUICK OVERVIEW
- USB Type: Type-A to Type-B
- Weight: 25 gm.
- Length: 30 cm.
- Fully compatible with the PC.
- Aluminum under-mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference
- Actual product may differ from the product shown
SKU: arduino cable₹39.00 -
3D Printer and Accessories, Arduino Boards, Arduino Shields, Motors | Drivers | Actuators
CNC Shield V3 – Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
Quick View3D Printer and Accessories, Arduino Boards, Arduino Shields, Motors | Drivers | ActuatorsCNC Shield V3 – Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
Minimum Order Quantity 1 Unit Frequency 50 to 60 Hz Voltage 110 to 220 V Current Rating 100-200 mA Packaging Type Box Model Name/Number CNC Shield Brand Robodo SKU: n/a -
Arduino Boards, Arduino Nano, Arduino Shields
Cytron LCD keypad Shield High Quality
QUICK OVERVIEW
- Provides a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
SKU: lcdshield -
Arduino Boards, Arduino Nano, Arduino Shields
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board compatible with Arduino w/o cable
Quick ViewArduino Boards, Arduino Nano, Arduino ShieldsDue AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board compatible with Arduino w/o cable
- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
SKU: n/a -
Arduino Boards, Arduino Nano, Arduino Shields, Development Boards, Integrated Circuits, IoT Boards
LilyPad 328 ATmega328P Main Board 16M
Quick ViewArduino Boards, Arduino Nano, Arduino Shields, Development Boards, Integrated Circuits, IoT BoardsLilyPad 328 ATmega328P Main Board 16M
QUICK OVERVIEW
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
SKU: n/a₹350.00 -
Arduino Boards, Arduino Nano, Arduino Shields
MQ-5 Methane LPG Liquid Propane Gas Sensor Module
Quick ViewArduino Boards, Arduino Nano, Arduino ShieldsMQ-5 Methane LPG Liquid Propane Gas Sensor Module
QUICK OVERVIEW
- Operating Voltage: 5V DC
- High sensitivity to LPG, natural gas, town gas.
- Small sensitivity to alcohol, smoke.
- Stable and long life.
- Simple drive circuit.
- Fast response.
SKU: woo-sunglasses₹90.00 -
Arduino Boards, Arduino Shields
Multifunction Shield For Arduino Uno / Leonardo
10 Days Returnable. Please refer to terms and conditions for summary
QUICK OVERVIEW
- 10K adjustable precision potentiometer.
- 3 x Independent push buttons.
- Piezo buzzer.
- DS18B20 temperature sensor interface.
- LM35 temperature sensor interface.
- Infrared receiver interface.
SKU: n/a -
Arduino Boards, Arduino Nano, Arduino Shields
NFC RFID RC522 RF IC Card Sensor RFID Reader Module
Quick ViewArduino Boards, Arduino Nano, Arduino ShieldsNFC RFID RC522 RF IC Card Sensor RFID Reader Module
- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- The low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Working current：13 – 26mA / DC 3.3V
- Standby current：10 – 13mA / DC 3.3V
- Sleep current：<80uA
- Peak current：<30mA
- Working frequency：13.56MHz
- Card reading distance ：0～60mm （Mifare1 card）
- Material: ABS
- Dimension(LxWxH): 43.7×30.5×5.3mm
- Response Frequency: 13.56MHz
- Chip type: FM1108 Fudan Chip
- Memory capacity: 8 kbit
- Designed for the RFID 13.56MHz duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
SKU: nfc/rfid shield₹145.00 -
Antennas, Arduino Boards, Arduino Shields, GPS & Navi, GPS/GSM Modems, IoT Boards
SmartElex GPS Data Logger Shield for Arduino
Quick ViewAntennas, Arduino Boards, Arduino Shields, GPS & Navi, GPS/GSM Modems, IoT BoardsSmartElex GPS Data Logger Shield for Arduino
- The multi-GNSS engine for GPS, GLONASS, Galileo, and QZSS.
- Embedded patch antenna.
- Automatic antenna switching function.
- High sensitivity: -167dBm @Tracking, -149dBm @Acquisition
- 99 acquisition channels, 33 tracking channels
- Balloon mode, for high altitude up to 80km
- Support DGPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)
- Great anti-jamming performance due to multi-tone active interference canceller
- Support SDK command developed by Quectel
SKU: n/a -
Arduino Boards, Arduino Nano, Arduino Shields, IoT Boards, wifi modules
UNO Based ESP8266 Nodemcu Development Board
Quick ViewArduino Boards, Arduino Nano, Arduino Shields, IoT Boards, wifi modulesUNO Based ESP8266 Nodemcu Development Board
QUICK OVERVIEW
- Based on ESP-8266EX.
- Arduino compatible, using Arduino IDE to program.
- Support OTA wireless upload.
- Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
- The direct use of Arduino IDE development, the same operation with Arduino UNO.
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1
SKU: n/a -
Arduino Boards, Arduino Nano, Arduino Shields, Breadboards & PCB
UNO Proto Shield prototype expansion board with SYB-170 mini breadboard
Quick ViewArduino Boards, Arduino Nano, Arduino Shields, Breadboards & PCBUNO Proto Shield prototype expansion board with SYB-170 mini breadboard
QUICK OVERVIEW
- It has a nice standard 0.1″x0.1″ prototyping grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- An IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
- Two 3mm general use LEDs, red and green, as well as 2 matching resistors
SKU: proto shield -
Arduino Boards, Arduino Nano, Arduino Shields
Wemos TTGO Xi 8F328P-U Board For Arduino Nano V3.0 Promini
Quick ViewArduino Boards, Arduino Nano, Arduino ShieldsWemos TTGO Xi 8F328P-U Board For Arduino Nano V3.0 Promini
QUICK OVERVIEW
- It comes with USB and is more convenient to use.
- The 8F328D can be powered by 3V3 and 5V, operating at 16M frequencies with excellent levels of compatibility.
- Built-in high precision RC, without external crystal oscillator, can be stable operation.
- Less peripheral parts, simple circuit design.
SKU: n/a₹290.00 -
Arduino Boards, Arduino Shields, IoT Boards, wifi modules, Xbee
XBee Shield V03 Module Wireless Control
Quick ViewArduino Boards, Arduino Shields, IoT Boards, wifi modules, XbeeXBee Shield V03 Module Wireless Control
- XCLUMA BLUETOOTH XBee SHIELD- V03 MODULE WIRELESS CONTROL For ARDUINO XBee
- BLUETOOTH XBee SHIELD- V03 MODULE WIRELESS CONTROL For ARDUINO Xbee
- Stackable design, easy to plug into ARDUINO development board; Coupled with Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly;
- Coupled with xbee module, you can achieve two or more sets of communication between Arduino or Arduino and PC Communications.
SKU: n/a₹349.00 -
Arduino Boards, Arduino Nano, Arduino Shields, Robotic kits
SchemoBotics – Capacitor, Transistor, Resistor Combo kit | 450 Pieces 49Values Box Pack Along with Free Ebook on Electronics
Quick ViewArduino Boards, Arduino Nano, Arduino Shields, Robotic kitsSchemoBotics – Capacitor, Transistor, Resistor Combo kit | 450 Pieces 49Values Box Pack Along with Free Ebook on Electronics
- Carbon Film Resistors, 20 Values and 10 pieces of each, Quantity: 200 pieces, Tolerance: 5 percent Power rating: 0. 25 Watt
- 20 values of capacitors 10 each labeled and packed separately. Quantity: 200
- 9 different Transistor values, Quantity: 50
- All the products by SchemoBotics offer a FREE Ebook with every order
SKU: 5487FB8/23
