IoT Boards
Showing 1–30 of 57 results
-
Bluetooth modules, IoT Boards, NRF modules
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
Quick ViewBluetooth modules, IoT Boards, NRF modules2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- This wireless transceiver module is an easy and suitable module if you want to setup your wireless communication system.
- It can achieve a good balance between wireless transition performance. You can easily add it with your own mcu/arm/pic/avr/stm32 system
- This nrf24l01+ module is with power amplifier and sma antenna this allowed you to use the wireless communication up to 1000 meters (no barrier)
- Color: Black
- Package Includes: 1 X Nrf24l01+pa+lna Wireless Transceiver Module & 1 X Sma Antenna
SKU: n/a -
IoT Boards, wifi modules
Ai Thinker LoRa Series Ra-02 Spread Spectrum Wireless Module
QUICK OVERVIEW
- Manufacturer: Ai-Thinker
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
SKU: n/a -
Arduino Boards, Arduino Nano, Arduino Shields, Development Boards, IoT Boards
Arduino Mega 2560 R3 Board
Quick ViewArduino Boards, Arduino Nano, Arduino Shields, Development Boards, IoT BoardsArduino Mega 2560 R3 Board
QUICK OVERVIEW
- 54 digital input / output terminals (14 of which have programmable PWM outputs).
- 16 analog inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
- Operating voltage: 6 ~ 12v.
- Dimensions: 110 x 53 x 15 mm.
SKU: n/a -
IoT Boards, wifi modules, Xbee
Cytron XBee Shield
QUICK OVERVIEW
Mounts directly onto your Arduino
DIN and DOUT pins of XBee can be connected to either the USB’s UART pins or another digital pin on the Arduino (D0, D1, D2, D3, D8, D9, D10, D11)
3.3V power regulation and proper level shifting on-board communication between 5V and 3.3V
Extra 0.1″ spaced prototyping holes
Reset button brought out to shield
Power, DIN, DOUT, RSSI, and DIO5 indicator LEDsSKU: n/a -
IoT Boards, wifi modules
DC7-30V 1 Channel ESP8266 WiFi Network Relay Module Power Switch
QUICK OVERVIEW
- With ESP8266 Wifi module,4-layers board design.
- Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
- automatic protection will operate.
- Input overcurrent protection.
- 220V 10A relay, one normally open, one normally closed.
- One way optocoupler isolation input, TVS input protection.
SKU: n/a -
IoT Boards, wifi modules, Xbee
Digi XBee3 2.4GHz ZB3.0 PCB Antenna
QUICK OVERVIEW
- Serial Data Interface: Uart, Spi, I2c.
- Configuration Method: API Or At Commands, Local Or Over-the-air.
- Frequency Band: ISM 2.4 GHz.
- Form Factor: Micro, Through-hole, Surface Mount.
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum).
- Adc Inputs: (4) 10-bit Adc Inputs.
- Digital I/o: 15
SKU: n/a -
IoT Boards, wifi modules, Xbee
Digi XBee3 2.4GHz ZB3.0 RP-SMA Female Antenna
QUICK OVERVIEW
- Serial Data Interface: Uart, Spi, I2c.
- Onboard Connector: RP-SMA Female.
- Configuration Method: API Or At Commands, Local Or Over-the-air
- Frequency Band: ISM 2.4 GHz
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum)
- Adc Inputs: (4) 10-bit Adc Inputs
- Digital I/o: 15.
SKU: n/a -
IoT Boards, wifi modules, Xbee
Digi XBee3 PRO 2.4GHz ZB3.0 RP-SMA Female Antenna
QUICK OVERVIEW
- Serial Data Interface: Uart, Spi, I2c.
- Onboard Connector: RP-SMA Female.
- Frequency Band: ISM 2.4 GHz.
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum).
- Adc Inputs: (4) 10-bit Adc Inputs
- Digital I/o: 15
SKU: n/a -
IoT Boards, wifi modules
ENC28J60 Ethernet Module(12 Pin Package: SSOP)
- Chip board ENC28J60-I/SO
- The board 25MHZ crystal
- The network interface board HR911105A
- 3.3 V power supply pin
- Package Include 1 x Ethernet Module
- HanRun HR911105A Ethernet port
- 3.3V supply voltage
- 100% Genuine ENC28J60 Chipset, compatible with Arduino etc.
- 25MHz Crystal.
- Standard HanRun HR911105A Ethernet Interface.
SKU: n/a -
IoT Boards, wifi modules
ESP-12E ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
Quick ViewIoT Boards, wifi modulesESP-12E ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
- Esp8266 esp-12e serial to wi-fi module ready for arduino, micropython, espruino, nodemcu, at+commands
- 16 digital, 1 analog gpio
- Pwm, adc, i2c and 1-wire available, access to all esp8266 pins (17gpio, ch_pd, adc, power, ground, and reset)
- 3.3v input power, typically used for soldering onto a pcb (castellated pins), easy install and no driver needed
SKU: n/a -
IoT Boards, wifi modules
ESP-12F ESP8266 Remote Serial Port WIFI Transceiver Wireless Module AP+STA
Quick ViewIoT Boards, wifi modulesESP-12F ESP8266 Remote Serial Port WIFI Transceiver Wireless Module AP+STA
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
SKU: n/a -
-
IoT Boards, wifi modules
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino
Quick ViewIoT Boards, wifi modulesESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino
- Supports Sniffer, Station, softAP and Wi-Fi Direct modes
- Data rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b
- Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
- Receiver sensitivity up to – 98 dBm
- UDP continues to throughput by 135 Mbps
SKU: n/a -
IoT Boards, wifi modules
ESP8266 Esp-01 Serial Wifi Wireless Transceiver Module
- 802.11 b or g or n protocol
- Wi-Fi 2.4 GHz, support WPA or WPA2
- Super small module size (11.5mm x 11.5mm)
- Deep sleep power <10uA
- Power down leakage current < 5uA
- Integrated low power 32-bit MCU
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
SKU: n/a -
IoT Boards, wifi modules
ESP8266 Serial Port To Wi-Fi Module, FL-M1S
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as application processor
SKU: n/a -
IoT Boards, Relays, wifi modules
ESP8266 WiFi 5V 1 Channel Relay Module IOT Smart Home Remote Control Switch
Quick ViewIoT Boards, Relays, wifi modulesESP8266 WiFi 5V 1 Channel Relay Module IOT Smart Home Remote Control Switch
QUICK OVERVIEW
- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
SKU: n/a -
IoT Boards, wifi modules
ESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU
Quick ViewIoT Boards, wifi modulesESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU
QUICK OVERVIEW
- LDR Light Sensor on board
- WS2812 Led on board
- Includes CH340G USB-to-UART programmer
- Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin
- Supports 3 modes: AP,STA,AP+STA
- Dimensions: 24mm x 16mm
- Micro USB connection for power and/or programming
SKU: n/a -
Antennas, GPS & Navi, GPS/GSM Modems, IoT Boards
FPV Ublox NEO-M8N GPS amp Compass Support DJI Naza M V1 & V2 Lite Flight Controller
Quick ViewAntennas, GPS & Navi, GPS/GSM Modems, IoT BoardsFPV Ublox NEO-M8N GPS amp Compass Support DJI Naza M V1 & V2 Lite Flight Controller
QUICK OVERVIEW
- Receiver type 72-channel Ublox M8 engine.
- Sensitivity Tracking & Nav: –167 dBm.
- Oscillator TCXO (NEO-M8N/Q).
- RTC crystal Built-In.
- Lowest noise figure (NEO-M8N/Q).
- Anti-jamming Active CW detection and removal. Extra.
- Onboard SAW bandpass filter (NEO-M8N/Q).
- Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N).
- Supported antennas Active and passive.
SKU: n/a -
Bluetooth modules, IoT Boards, NRF modules
FT232RL USB to TTL 3.3V 5.5V Serial Adapter Module for Arduino
Quick ViewBluetooth modules, IoT Boards, NRF modulesFT232RL USB to TTL 3.3V 5.5V Serial Adapter Module for Arduino
QUICK OVERVIEW
- Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini
- Original FTDI FT232 chip, stable performance
- USB power has current protection, using 500MA self-restore fuse
- RXD/TXD transceiver communication indicator
- With power, sending, receiving indicator, working status LED indicators
- Mini USB Port Connection
- Support 3.3V, 5V
SKU: n/a -
Antennas, GPS & Navi, GPS/GSM Modems, IoT Boards
GPS/GLONASS GNSS Antenna for Raspberry Pi HAT and Arduino Shield with 3 Meter Cable
Quick ViewAntennas, GPS & Navi, GPS/GSM Modems, IoT BoardsGPS/GLONASS GNSS Antenna for Raspberry Pi HAT and Arduino Shield with 3 Meter Cable
- The antenna assembly consists of a patch antenna for receiving GNSS signals and a preamplifier for signal amplification.
- Power supply to the antenna preamplifier must be provided by the application on the same RF signal trace as the GNSS RF signal is carried to the application.
- The antenna has an internal magnet so that it can be fixed on a metallic surface.
- Easy to use an antenna. Does not require RF or antenna knowledge.
This GPS/GLONASS GNSS Antenna is designed for applications which require high positioning accuracy by combining signals from GPS, GLONASS, systems. The tiny size of this antenna allows it to be used in very space restricted environments.
SKU: n/a -
Bluetooth modules, IoT Boards
HC-05 6 pin Wireless Bluetooth Rf Transceiver Module Serial or TTL or RS232 for Arduino
Quick ViewBluetooth modules, IoT BoardsHC-05 6 pin Wireless Bluetooth Rf Transceiver Module Serial or TTL or RS232 for Arduino
QUICK OVERVIEW
- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
- Sensitivity: =-84dBm at 0.1% BER.
SKU: n/a -
-
Bluetooth modules, IoT Boards, NRF modules
HC-42 6pin Bluetooth 5.0BLE Serial Port Module
QUICK OVERVIEW
- Frequency Band: 2.4G.
- Air Rate: 1Mbps/2Mbps.
- Working Voltage: 1.8~3.6V.
- Antenna: PCB internal antenna.
- Shutdown Current: 0.3μA.
- Working Temperature: -25℃~+75℃.
- Reference Distance: 40m/2Mbps.
SKU: n/a -
Bluetooth modules, IoT Boards, NRF modules
HM-10 BLE Bluetooth 4.0 Module CC2540 CC2541 Serial Wireless Module iBeacon for Arduino iOS Android
Quick ViewBluetooth modules, IoT Boards, NRF modulesHM-10 BLE Bluetooth 4.0 Module CC2540 CC2541 Serial Wireless Module iBeacon for Arduino iOS Android
- The master-slave module has three functions of transparent transmission, remote control and PIO acquisition. It can be switched and set through the AT command set. It is easy to use the same as the Bluetooth serial port module you have used before, without changing the PCB and the lower computer program. Upgrade to Bluetooth 4.0!
- It adopts CC2541 chip, configures 256kb space, follows the 4.0BLE Bluetooth specification, and supports AT command. Users can change the serial port baud rate, device name, pairing password and other parameters as needed, which is flexible.
- Support UART/I2C interface, and support SPP Bluetooth serial port protocol, has the advantages of low cost, small size, low power consumption, high sensitivity of sending and receiving, etc., only need to be equipped with a few peripheral components to achieve its powerful functions.
SKU: n/a