Motors | Drivers | Actuators
Showing all 15 results
-
Motors | Drivers | Actuators, Stepper Motor & Drivers
3D Printer Stepper Motor Driver Control Extension Shield Board For A4988 DRV8825
Quick ViewMotors | Drivers | Actuators, Stepper Motor & Drivers3D Printer Stepper Motor Driver Control Extension Shield Board For A4988 DRV8825
- Compatible with : DRV8825, A4988, TMC2208, LV8927, TBS109, TMC2100
- Switch for micro stepping configuration
- power supply pins : +5V / +12V /+24V
- Control pins: Enable, Direction, Step
- Compatible with Arduino, Raspberry Pi, Ramps 1.4, ARM, etc….
SKU: n/a -
Motor, Motors | Drivers | Actuators, Stepper Motor & Drivers
A3967 Stepper Motor Driver For Arduino
Quick ViewMotor, Motors | Drivers | Actuators, Stepper Motor & DriversA3967 Stepper Motor Driver For Arduino
QUICK OVERVIEW
- Power supply: 7V to 30V.
- The higher the voltage, the higher the torque at high speeds.
- Adjustable current control from 150mA/phase to 750mA/phase.
- Logic voltage: 5V or 3.3V.
- A3967 microstepping driver.
SKU: n/a -
Motor, Motors | Drivers | Actuators, Stepper Motor & Drivers
A4988 Stepper Motor Driver With Heatsink 1.5A
Quick ViewMotor, Motors | Drivers | Actuators, Stepper Motor & DriversA4988 Stepper Motor Driver With Heatsink 1.5A
QUICK OVERVIEW
- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection / choice.
- Mixed with slow current decay mode.
SKU: n/a -
Motors | Drivers | Actuators, Quadcopters/Frames/Controllers
Ardupilot APM 2.8 Flight Controller Board
Quick ViewMotors | Drivers | Actuators, Quadcopters/Frames/ControllersArdupilot APM 2.8 Flight Controller Board
Compatible!Includes 3-axis gyro, accelerometer, along with a high-performance barometerOnboard 4 MegaByte Dataflash chip for automatic dataloggingOptional off-board GPS, LEA-6H module with Compass.One of the first open source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000.Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively.SKU: n/a -
3D Printer and Accessories, Arduino Boards, Arduino Shields, Motors | Drivers | Actuators
CNC Shield V3 – Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
Quick View3D Printer and Accessories, Arduino Boards, Arduino Shields, Motors | Drivers | ActuatorsCNC Shield V3 – Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
Minimum Order Quantity 1 Unit Frequency 50 to 60 Hz Voltage 110 to 220 V Current Rating 100-200 mA Packaging Type Box Model Name/Number CNC Shield Brand Robodo SKU: n/a -
Motor, Motors | Drivers | Actuators, Stepper Motor & Drivers
CNC Three Axis Stepper Motor Drive Controller Motherboard compatible with Arduino
Quick ViewMotor, Motors | Drivers | Actuators, Stepper Motor & DriversCNC Three Axis Stepper Motor Drive Controller Motherboard compatible with Arduino
QUICK OVERVIEW
- Model: LBA-B-V4.
- Axis: XYZ Three Axis.
- Power Supply: 12V.
- Dimension: 120 x 65 mm.
- Pitch size: 112 x 57 mm.
- Laser Power: 100mW to 5W.
- Stepper Motor Power: Max 2A.
SKU: n/a -
Motor, Motors | Drivers | Actuators, Stepper Motor & Drivers
Cytron 20Amp 6V-30V DC Motor Driver MD20A
Quick ViewMotor, Motors | Drivers | Actuators, Stepper Motor & DriversCytron 20Amp 6V-30V DC Motor Driver MD20A
QUICK OVERVIEW
- Bidirectional control for one brushed DC motor.
- Operating Voltage: DC 6V to 30V
- Maximum Motor Current: 20A continuous, 60A peak
- Buttons for quick testing.
- LEDs for motor output state.
- Overcurrent protection with active current limiting.
- Temperature protection.
- Undervoltage shutdown.
SKU: n/a -
Motor, Motors | Drivers | Actuators, Stepper Motor & Drivers
Cytron 3Amp 4V-16V Dual Channel DC Motor Driver MDD3A
Quick ViewMotor, Motors | Drivers | Actuators, Stepper Motor & DriversCytron 3Amp 4V-16V Dual Channel DC Motor Driver MDD3A
QUICK OVERVIEW
- Bidirectional control for two brushed DC motor.
- Control one unipolar/bipolar stepper motor.
- Operating Voltage: DC 4V to 16V
- Maximum Motor Current: 3A continuous, 5A peak
- Buck-boost regulator to produce 5V output (200mA max).
- Buttons for quick testing.
SKU: n/a -
Motors | Drivers | Actuators, Stepper Motor & Drivers
Cytron Maker Drive H-Bridge Motor Driver
Quick ViewMotors | Drivers | Actuators, Stepper Motor & DriversCytron Maker Drive H-Bridge Motor Driver
QUICK OVERVIEW
- Dual channel, Bi-directional control motor driver
- Support motor voltage from 2.5V to 9.5VDC
- Maximum current up to 1.0A continuous and 1.5A peak (<5 seconds)
- 5V Output (200mA) to power the controller.
- Inputs compatible with 1.8V, 3.3V and 5V logic (Arduino, Raspberry Pi, etc).
- Solid state components provide faster response time and eliminate the wear and tear of mechanical relay
- Regenerative Braking
SKU: n/a -
Motors | Drivers | Actuators, Stepper Motor & Drivers
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
Quick ViewMotors | Drivers | Actuators, Stepper Motor & DriversDRV8825 Stepper Motor Driver with Aluminum Heat Sink
QUICK OVERVIEW
- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity : 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Maximum Logic Voltage: 5V.
- Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
SKU: n/a -
Motor, Motors | Drivers | Actuators, Quadcopters/Frames/Controllers
DYS D2822 1100, 1400, 1800 KV Out-Runner BLDC Brushless Motor
Quick ViewMotor, Motors | Drivers | Actuators, Quadcopters/Frames/ControllersDYS D2822 1100, 1400, 1800 KV Out-Runner BLDC Brushless Motor
SPECIFICATION:
1. Brand:DYS
2. Item:D2282 Brushless Motor
3. KV:2600KV/1800KV/1450KV/1100KV are available
4. Pull: 850g/660g/550g/520g
5. Motor size(mm): 28*22
6. Battery: 2-3s LipoSKU: n/a -
3D Printer and Accessories, Motor, Motors | Drivers | Actuators
Nema17 Stepper Motor With Stainless Steel 8mm 300mm Lead Screw T8 Nut For 3D Printer CNC Machine
Quick View3D Printer and Accessories, Motor, Motors | Drivers | ActuatorsNema17 Stepper Motor With Stainless Steel 8mm 300mm Lead Screw T8 Nut For 3D Printer CNC Machine
Step angle accuracy: + – 5%(full step,not load)Resistance accuracy: + – 10%Inductance accuracy: + – 20%Temperature rise: 80deg Max(rated current,2 phase on)Ambient temperature ———-20deg ~+50degInsulation resistance:100M Min,500VDCInsultion Strength——–500VAC for one minuteSKU: n/a -
3D Printer and Accessories, Motors | Drivers | Actuators
RAMPS 1.4 2004 LCD Smart Display Controller Module
Quick View3D Printer and Accessories, Motors | Drivers | ActuatorsRAMPS 1.4 2004 LCD Smart Display Controller Module
Features:
- RAMPS 1.4 LCD2004 intelligent controller
- LED backlight control circuit
The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using “smart adapter” included.
SKU: n/a -
3D Printer and Accessories, Motors | Drivers | Actuators
RAMPS 1.6 Shield for 3D Printers
- Ramps 1.6 is optimized and launched based on Ramps 1.4 & Ramps 1.5
- The Structure almost same as Ramps 1.5, the difference is Ramps 1.6 have new 2pin connectors, which more simple and convenient to connect, also will not be burnt easily.
- What’s more, Ramps 1.6 have a good Heatsink above MOS tube in order to give a better function to heat dissipation.
- Besides, the Power of Ramps 1.6 is larger than Ramps 1.5, the largest power will be up to or 270W, and Ramps 1.5 just can be up to 200W, or smaller than 200W.
SKU: n/a