wifi modules
Showing 1–30 of 38 results
-
IoT Boards, wifi modules
Ai Thinker LoRa Series Ra-02 Spread Spectrum Wireless Module
QUICK OVERVIEW
- Manufacturer: Ai-Thinker
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
SKU: n/a -
IoT Boards, wifi modules, Xbee
Cytron XBee Shield
QUICK OVERVIEW
Mounts directly onto your Arduino
DIN and DOUT pins of XBee can be connected to either the USB’s UART pins or another digital pin on the Arduino (D0, D1, D2, D3, D8, D9, D10, D11)
3.3V power regulation and proper level shifting on-board communication between 5V and 3.3V
Extra 0.1″ spaced prototyping holes
Reset button brought out to shield
Power, DIN, DOUT, RSSI, and DIO5 indicator LEDsSKU: n/a -
IoT Boards, wifi modules
DC7-30V 1 Channel ESP8266 WiFi Network Relay Module Power Switch
QUICK OVERVIEW
- With ESP8266 Wifi module,4-layers board design.
- Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
- automatic protection will operate.
- Input overcurrent protection.
- 220V 10A relay, one normally open, one normally closed.
- One way optocoupler isolation input, TVS input protection.
SKU: n/a -
IoT Boards, wifi modules, Xbee
Digi XBee3 2.4GHz ZB3.0 PCB Antenna
QUICK OVERVIEW
- Serial Data Interface: Uart, Spi, I2c.
- Configuration Method: API Or At Commands, Local Or Over-the-air.
- Frequency Band: ISM 2.4 GHz.
- Form Factor: Micro, Through-hole, Surface Mount.
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum).
- Adc Inputs: (4) 10-bit Adc Inputs.
- Digital I/o: 15
SKU: n/a -
IoT Boards, wifi modules, Xbee
Digi XBee3 2.4GHz ZB3.0 RP-SMA Female Antenna
QUICK OVERVIEW
- Serial Data Interface: Uart, Spi, I2c.
- Onboard Connector: RP-SMA Female.
- Configuration Method: API Or At Commands, Local Or Over-the-air
- Frequency Band: ISM 2.4 GHz
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum)
- Adc Inputs: (4) 10-bit Adc Inputs
- Digital I/o: 15.
SKU: n/a₹2,449.00 -
IoT Boards, wifi modules, Xbee
Digi XBee3 PRO 2.4GHz ZB3.0 RP-SMA Female Antenna
QUICK OVERVIEW
- Serial Data Interface: Uart, Spi, I2c.
- Onboard Connector: RP-SMA Female.
- Frequency Band: ISM 2.4 GHz.
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum).
- Adc Inputs: (4) 10-bit Adc Inputs
- Digital I/o: 15
SKU: n/a₹3,449.00 -
wifi modules
DOIT Mini Ultra-Small size ESP-M3 Serial WiFi Transmission Module compatible to ESP8266
Quick View
wifi modulesDOIT Mini Ultra-Small size ESP-M3 Serial WiFi Transmission Module compatible to ESP8266
QUICK OVERVIEW
- Derived from ESP8266, ESP8285 has a flash memory of 1MB
- Operating Voltage: 3.3V
- Totally compatible with ESP8266
- WiFi support 802.11 b/g/n/e/i
- High temperature resistant, working temperature: -40℃-125℃
SKU: n/a -
IoT Boards, wifi modules
ENC28J60 Ethernet Module(12 Pin Package: SSOP)
- Chip board ENC28J60-I/SO
- The board 25MHZ crystal
- The network interface board HR911105A
- 3.3 V power supply pin
- Package Include 1 x Ethernet Module
- HanRun HR911105A Ethernet port
- 3.3V supply voltage
- 100% Genuine ENC28J60 Chipset, compatible with Arduino etc.
- 25MHz Crystal.
- Standard HanRun HR911105A Ethernet Interface.
SKU: n/a -
IoT Boards, wifi modules
ESP-12E ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
Quick ViewIoT Boards, wifi modulesESP-12E ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
- Esp8266 esp-12e serial to wi-fi module ready for arduino, micropython, espruino, nodemcu, at+commands
- 16 digital, 1 analog gpio
- Pwm, adc, i2c and 1-wire available, access to all esp8266 pins (17gpio, ch_pd, adc, power, ground, and reset)
- 3.3v input power, typically used for soldering onto a pcb (castellated pins), easy install and no driver needed
SKU: n/a -
IoT Boards, wifi modules
ESP-12F ESP8266 Remote Serial Port WIFI Transceiver Wireless Module AP+STA
Quick ViewIoT Boards, wifi modulesESP-12F ESP8266 Remote Serial Port WIFI Transceiver Wireless Module AP+STA
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
SKU: n/a -
IoT Boards, wifi modules
ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization
Quick View -
IoT Boards, wifi modules
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino
Quick ViewIoT Boards, wifi modulesESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino
- Supports Sniffer, Station, softAP and Wi-Fi Direct modes
- Data rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b
- Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
- Receiver sensitivity up to – 98 dBm
- UDP continues to throughput by 135 Mbps
SKU: n/a -
IoT Boards, wifi modules
ESP8266 Esp-01 Serial Wifi Wireless Transceiver Module
- 802.11 b or g or n protocol
- Wi-Fi 2.4 GHz, support WPA or WPA2
- Super small module size (11.5mm x 11.5mm)
- Deep sleep power <10uA
- Power down leakage current < 5uA
- Integrated low power 32-bit MCU
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
SKU: n/a -
IoT Boards, wifi modules
ESP8266 Serial Port To Wi-Fi Module, FL-M1S
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as application processor
SKU: n/a -
IoT Boards, Relays, wifi modules
ESP8266 WiFi 5V 1 Channel Relay Module IOT Smart Home Remote Control Switch
Quick ViewIoT Boards, Relays, wifi modulesESP8266 WiFi 5V 1 Channel Relay Module IOT Smart Home Remote Control Switch
QUICK OVERVIEW
- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
SKU: n/a -
IoT Boards, wifi modules
ESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU
Quick ViewIoT Boards, wifi modulesESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU
QUICK OVERVIEW
- LDR Light Sensor on board
- WS2812 Led on board
- Includes CH340G USB-to-UART programmer
- Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin
- Supports 3 modes: AP,STA,AP+STA
- Dimensions: 24mm x 16mm
- Micro USB connection for power and/or programming
SKU: n/a -
IoT Boards, wifi modules, Xbee
M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module
10 Days Returnable. Please refer to terms and conditions for summary.
QUICK OVERVIEW
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
- Particularly suitable for industrial control applications.
- Built-in hardware CRC error detection, Multipoint communication address control.
- Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
- Built-in 2.4Ghz antenna
- Built-in voltage regulator
- Standard DIP Pitch Interface for embedded applications
SKU: n/a -
IoT Boards, wifi modules
NANO32 ESP32 IoT Development Board
QUICK OVERVIEW
-
ESP32 SoC (System on Chip) with WiFi and Bluetooth BLE
-
40MHz Crystal for CPU, 32.768KHz for RTC and low power operation
-
4MB Flash (32MBit)
-
FTDI231 for the USB to Serial communication
-
Auto-reset for automatic flash of new program
-
On board 3.3V, 0.5A LDO, tested to work upto 1A
-
2.5dBi Peak Gain, 0.5dBi averange gain antenna
SKU: n/a -
-
IoT Boards, wifi modules
Sonoff Basic WI-FI Intelligent Timer Switch 10A 220W Digital Wireless Control Module
Quick ViewIoT Boards, wifi modulesSonoff Basic WI-FI Intelligent Timer Switch 10A 220W Digital Wireless Control Module
QUICK OVERVIEW
- Support 433MHz RF remote.
- Support remotely turn on or off added devices.
- Support Max 8 timers tasks for each added device.
- Works with AMAZON ALEXA
- Works with GOOGLE ASSISTANT
- Also, Work with NEST
- Support numerous WiFi smart switches one smartphone.
SKU: n/a -
Arduino Boards, Arduino Nano, Arduino Shields, IoT Boards, wifi modules
UNO Based ESP8266 Nodemcu Development Board
Quick ViewArduino Boards, Arduino Nano, Arduino Shields, IoT Boards, wifi modulesUNO Based ESP8266 Nodemcu Development Board
QUICK OVERVIEW
- Based on ESP-8266EX.
- Arduino compatible, using Arduino IDE to program.
- Support OTA wireless upload.
- Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
- The direct use of Arduino IDE development, the same operation with Arduino UNO.
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1
SKU: n/a
