|Operating Voltage||3.3 V|
|Interface||3-wire SPI, 4-wire SPI|
|Outline Dimension||48 x 33 mm|
|Display Size||27.6 x 27.6 mm|
|Dot pitch||0.138 x 0.138|
|Resolution||200 x 200|
|Display Color||Black, White|
|Refresh Power||26.4 mW (typ.)|
|Standby Power||<0.17 mW|
|Viewing Angle||>170 Degree|
This is a 1.54inch E- Paper Display Module, E-Ink display module, 1.54inch, 200×200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Interface – 1.54inch E- Paper Display Module
|DIN||SPI MOSI pin|
|CLK||SPI SCK pin|
|CS||SPI chip selection, low active|
|DC||Data/Command selection (high for data, low for command)|
|RST||External reset, low active|
|BUSY||Busy status output, low active|