-23%
, ,

2.13inch E- Paper Display HAT for Raspberry Pi


Non Returnable.  Please refer to terms and conditions for summary

QUICK OVERVIEW

  1. Display Resolution: 212 x 104
  2. Display Color: Red, Black and White
  3. No backlight keeps displaying last content for a long time even when power is down
  4. Ultra low power consumption, basically power is only required for refreshing
  5. Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+

2,299.00 2,999.00

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212×104 resolution, with an embedded controller, communicating via SPI interface, supports the red, black, and white three-colour display.

There is no backlight so it can keep displaying last content for a long time even when the power is down. As these displays have no backlight panels and it doesn’t need a continuous power supply to display the (static data with periodic intervals) data on the screen, it has a great advantage of ultra-low power consumption. Also, it has a wide viewing angle, great viewing effect under sunlight,  Basically power to the display is only required for refreshing. For connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.. SPI interface can be used.


Features:

  1. No backlight keeps displaying last content for a long time even when power is down
  2. Ultra low power consumption, basically power is only required for refreshing
  3. Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
  4. Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  5. Onboard voltage translator, compatible with 3.3V/5V MCUs
  6. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Interface:

SYMBOL DESCRIPTION
VCC 3.3V/5V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, high active

 


Useful Links:

Wiki : www.waveshare.com/wiki/2.13inch_e-Paper_HAT_(B)


Package Includes:

1 x 2.13inch E-Ink Paper display HAT for Raspberry Pi

1 x Interfacing Cable

1 x Nut-Bolt and Spacer set

 

Note: No Raspberry Pi is included in Package 

Operating Voltage(VDC) 3.3V
Display Size 23.71mm × 48.55mm
Outline dimension 65mm × 30.2mm
Dot Pitch 0.229 × 0.228
Grey level 2
Display Color Red, Black and White
Display Resolution 212 × 104
Viewing Angle >170°
Interface 3-wire SPI, 4-wire SPI
Full Refresh Time 15s
Refresh Power 26.4mW(typ.)
Standby Power <0.017mW
Dimensions in mm (LxWxH) 65 x 31 x 8
Weight (gm) 20
Shipment Weight 0.095 kg
Shipment Dimensions 9 × 7 × 4 cm

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “2.13inch E- Paper Display HAT for Raspberry Pi”

There are no reviews yet.

X