LM324N Integrated Circuit-PDIP-14 Operational Amplifier

Availability:

6 in stock
Add to Wishlist

QUICK OVERVIEW

  1. Wide supply voltage ranges
  2. Low supply-current drain independent of supply voltage
  3. Common-mode input voltage range includes ground, allowing direct sensing near ground
  4. Low input bias and offset parameters
  5. Internal frequency compensation
  6. Common mode input voltage range includes ground, allowing direct sensing near ground
  7. Input offset voltage is typical 3mV
  8. Input offset current is typical 2nA
  9. A differential input voltage range of 32V equal to the maximum rated supply voltage

₹18.00

6 in stock

These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V (3 V to 26 V for the LM2902), and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.

Features:

  1. Wide supply voltage ranges
  2. Low supply-current drain independent of supply voltage
  3. Common-mode input voltage range includes ground, allowing direct sensing near ground
  4. Low input bias and offset parameters
  5. Internal frequency compensation
  6. Common mode input voltage range includes ground, allowing direct sensing near ground
  7. Input offset voltage is typical 3mV
  8. Input offset current is typical 2nA
  9. A differential input voltage range of 32V equal to the maximum rated supply voltage
  10. Operating temperature range from 0°C to 70°C
  11. Applications: Signal Processing, Consumer Electronics, Portable Devices, Sensing & Instrumentation, Motor Drive & Control, Test & Measurement

Note: Supply voltages larger than 32V for single supply and outside the range of ±16V for dual supply can permanently damage the IC

Warnings: This device has limited built-in ESD protection. The leads should be shorted together or device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.

 

Package/Case PDIP-14
Amplifier Type General Purpose Amplifier
Minimum Supply Voltage 3 V
Maximum Supply Voltage 32 V
Number of Channel 4
Output Current Per Channel 40 mA
Input Bias Current (Ib) 45 nA
Gain Bandwidth Product (GBP) 1.2 MHz
Input Offset Voltage (Vos) 7 mV
Slew Rate (SR) 0.5 V/us
CMRR 65 dB to 80 dB
Voltage Gain (dB) 100 dB
Technology Bipolar
Max Dual Supply Voltage +/- 16 V
Min Dual Supply Voltage +/- 1.5 V
Operating Current 1.5 mA
Operating Temperature Range 0ºC to 70ºC
Dimensions (mm) LxWxH 19.3 x 6.35 x 4.47
Shipment Weight 0.085 kg
Shipment Dimensions 8 x 6 x 3 cm
SKU: LM324N Integrated Circuit-PDIP-14 Operational Amplifier Category: Tag:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “LM324N Integrated Circuit-PDIP-14 Operational Amplifier”

There are no reviews yet.

Related products

X