-12%
, , ,

Ublox NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8


Tracking sensitivity: 161 dBm
Capture sensitivity : 148 dBm
cold start time: 38s average
Warm start time: 35s average
hot start time: 1s average
Capture time: 0.1s Average

1,429.00 1,619.00

3,578.00 for 2 item(s)

This is a Ublox Neo 7M GPS module that includes a HMC5883L digital compass.  The new Ublox NEO 7 series is a high sensitivity, low power GPS module that has 56 channels and outputs precise position updates at 10Hz.  This GPS module also comes with a moulded plastic case which keeps the module protected against the elements making it ideal for use on your aircraft or quadcopter.  This Ublox GPS module uses an active circuitry ceramic patch antenna to provide excellent GPS signal which outperforms the older Ublox Neo 6 series modules.   This Ublox Neo 7 module also includes a rechargeable backup battery to allow for HOT starts and also includes an i2c EEPROM to store the configuration settings.  Out of the box this GPS module is configured to run at 38400 Baud and is configured to run with APM/Pixhawk systems.  This GPS module includes two cables, a 6pin connector for the GPS module and a 4 pin connector for the i2c compass.

 

Tracking sensitivity: 161 dBm
Capture sensitivity : 148 dBm
cold start time: 38s average
Warm start time: 35s average
hot start time: 1s average
Capture time: 0.1s Average

 

Features:
• uBlox Neo-7M module
• 56-channel
• GPS L1 C/A, GLONASS L1 FDMA
• QZSS L1 C/A
• Galileo E1B/C
• SBAS: WAAS, EGNOS, MSAS
• 10Hz update rate
• 25x25x2 Ceramic patch antenna
• Rechargeable 3V Backup battery
• Low noise 3.3V regulator
• I2C EEPROM storage
• Power and fix LED’s
• Pedestal Mount/Case
• Pixhawk/PX4 compatible
• LNA MAX2659ELT+
• Pre-configured 38,400 Baud and prams

 

Specs:
Size: 60×11.5mm
Mount: 140mm length
Cable length: 200mm
Weight: 26g
Connection: Compass 4 pin/ GPS 6 pin (Pixhawk/PX4 compatible)

 

Package Includes :

1 x Ublox Neo 7M GPS module.

1.5 GNSS
u-blox 7 positioning modules are GNSS receivers and can singly receive and track GPS, GLONASS, or Galileo
signals. QZSS signals may be received concurrently with GPS signals.
1.5.1 GPS
u-blox 7 receivers are designed to receive and track the L1C/A signals provided at 1575.42 MHz by the Global
Positioning System (GPS).
1.5.2 GLONASS
The Russian GLONASS satellite system is an alternative system to the US-based Global Positioning System (GPS).
The u-blox 7 module is capable of receiving and processing GLONASS signals using the same hardware and
provides the lowest power GLONASS functionality in the industry at low cost and with minimal integration
effort. In order to take advantage of GPS and GLONASS, dedicated hardware preparation must be taken during
the design-in phase, see the MAX-7 / NEO-7 Hardware Integration Manual [1] for u-blox design
recommendations.
The ability to receive and track GLONASS L1OF satellite signals with the same hardware results in an optimized
hardware BOM and allows design of GLONASS ready receivers where required by regulations.
Note: GLONASS and GPS signals cannot be received and tracked simultaneously by u-blox 7 modules.
1.5.3 Galileo
When Galileo-L1 signals become available, u-blox 7 flash-based receivers will be capable of receiving and
processing them via a firmware upgrade. The ability to receive and track Galileo satellite signals will result in
higher coverage, improved reliability and better accuracy.
1.5.4 QZSS
The Quasi-Zenith Satellite System (QZSS) is a navigation satellite overlay system for the Pacific region covering
Japan and Australia which transmits additional GPS L1C/A signals. u-blox 7 positioning modules are able to receive and to track these signals simultaneously with GPS, resulting in better availability, especially under bad
signal conditions e.g. in urban canyons.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Ublox NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8”

There are no reviews yet.

X